characteristics:
this machine is used for various small micromotor rotor commutator cylindrical turning device; the rotor by diamond ⅴ jig (free lubrication) support localization, flat belt drive rotation; can huanxing data points model input register, allow stored 50 rotor turning parameters; run time dynamic display the current various parameters: including class production, cumulative production,
production time, rotor speed, cutting feed parameters, etc.; has a cutting limited functionality, turning number reach the set value, the machine automatically stop and alarm
to remind the operator to replace tool; turning station 1 ~ 4 times of turning times can be set pressure arm agencies use servo motor drive belt, speed adjustable; equipment is divided into two types of manual and automatic operation mode, automatic mode with single step
and two kind of way, safe and reliable operation, change the finishing tool is convenient, equipment whole stability
without
major technical parameters:
◆ turning precision: roundness: ≦0.003mm, inter- piece
◆ jump: 0.0025mm, surface roughness: ≦ra0.4- ra0.8
◆ o.d. of rotor: φ15～φ30mm
◆ length of rotor shaft: 45~140mm(from the commutator end shaft distance 15~45mm)
◆ diameter of rotor shaft: φ2～φ5mm
◆ o.d. of commutator: φ6～φ16mm
◆ cutting length: 5mm~15mm
◆ working efficiency: 10 seconds each (twice turning)
◆ power supply: 220v±10%, ac (50hz), about 4kw (r680c)
◆ working pressure: 0.5～0.7mpa
◆ dimensions: 800x1200x1700mm (w×l×h)
◆ weight: about400kg