functions and features:
the equipment is applicable to the winding and spot welding of skewed rotor and straight flute rotor of various micromotors
（note：rotor of hook-type commutator).integrate winding and commutator spot welding into one.the first hook and the tail
hook of winding can be recognized.use corresponding current to butt weld; the equipment is operated singly or the fully automatic equipment by cooperating with different wires; winding,wire clipping,pulling apart wire,spot welding etc functions are completed automatically; rapid replacement of winding mould and fixture is finished within 30 minutes; be applicable to various different hook-type winding ways such as duplex winding etc; flying-fork dynamic balance is stable without opening mould and transposition.the time of winding is reduced greatly; motion control system is adopted for the equipment.the servo acceleration time and deceleration time is lowered and the
efficiency of winding is improved;
major technical parameters:
◆ main machine configuration：2500x1600x2000mm（l×w×h） ◆ weight：900kg
◆ input power：30.0kw
◆ input voltage：3-phase ac380v
◆ working air pressure：0.5～0.7mpa
◆ efficiency：10 s/p（8 hooks/8 slots /21 turns/standard winding 0.35mm wire diameter）
◆ maximum rotor speed/rated rotor speed： 4500rpm(no- load)/3000rpm
◆ rotor outer diameter: φ20～φ68mm (φ68～φ81mm specialordered)
◆ rotor stack thickness: 20～70mm
◆ rotor bars: more than 8 slots
◆ rotor shaft diameter: φ3～φ12mm
◆ commutator outer diameter: φ10～φ40 mm
◆ rotor shaft length: 60 ～220mm(from the commutator shaftdistance is less than or equal to 60mm)