major technical parameters:
o.d. of rotor: φ25～φ65mm(special types need to be ordered.)
number of poles for commutator: less than 36
axial thickness of commutator: more than 10mm apart from hook
production tact: less than 10seconds/single cycle
input voltage: 220v ac
characteristics:
full automatic charging, clamping, turning, baiting and burr-brushing;
cast iron stand, diamond v-support, servo-driven motion piece of high precision, accurate and reliable turning;
excellent scraps collection: the craps collection rate could reach 95% if turning to
characteristics:
specifically used for rotor slot (straight slot/skewed slot) of series motor for inserting slot wedge. the functions of feeding, creasing and indexing are realized only via a common ac motor. ideal combinations of a cam gear and an off-center mechanism and rocker mechanism acc
characteristics:
specifically used for small out diameter of rotor and wire diameter for winding, high speed.
automatic winding, hooking and cutting the wire.
change fixture convenience.
applicable to various types of hooking and winding.
characteristics:
automatic winding, hooking, clipping and cutting of wire and charging/baiting;
fast change of winding moulds and fixture;
applicable to various types of hooking and winding such as duplex winding;
commutator pressing machine r3000
it is used with production line and can automatically complete assembly of commutator and iron core shaft of rotor
commutator is fed automatically by vibrating disk and rotor is picked up by a manipulator on production line, to realize automatic loading an
characteristics:
used for pressed assembly of end-plates of all types of rotors;
complete the pressed assembly of front and back end-plates at one time.
full automatic charging, pressed assembly and baiting;
easy change: only change of proper moulds is needed.
it may be con
this machine can press shafts into rotors of all kinds of micro motors.
it is controlled by plc. material storage mechanism can supply shafts for main machine to complete shaft pressing. the machine is made up of four parts which are main machine, fixture and manipulator for loading and
highly intellectual identification missing no working procedure;
whole process self-check technology, preventing disqualified products from flowing to the next procedure;
high-quality aluminum alloy frame of high linearity and no deformation;
imported plc control with reliable perfo